Rubber/Plastic Mixing Mill

Application: The machine is applicable for plasticating, warming and mixing rubber.

STRUCTURAL FEATURES:

    The rolls are made of chilled cast iron with vanadium and titanium alloys. The roll face is hard and anti-wear. To heat up or cool down, the rolls are either circumferentially drilled or centrally bored so as to make the temperature well proportioned on the roll surface.

     The machine is equipped with a hydraulic relief device. When an emergent accident happens, just press down the button and the machine will stop immediately. It is safe and reliable.

     The machine adopts electric nip regulating device that provides easy operation.

     Bearings for the rolls are double-row ball bearings, which are convenient for maintenance and have a longer service life.

     The transmission system may adopt a hard facing gear reducer, which has a compacted structured with high transmission efficiency, lower noise and longer service life.

     

APPLICATION:

    The machine is applicable for plasticating, warming and mixing rubber.

 

Technical Parameters:

Model & Spec.		XK-660
F. & B. Rolls (Diameter × Length)		660×2130
Cooling Model	F. roll	Circumferentially Drilled or Centrally Bored
	B. roll	Centrally Bored
Working Speed of Front Roll		22.6(m/min)
Friction Ratio of F. & B. Rolls		1:1.09
Nip Regulating Range		0.5~15
Power of Nip Regulating Motor		2.2kw×2
Batch Capacity		165(Kg)
Main Motor Power		180 (KW)
Speed Reducer		NGW Planetary Hardened-gear Speed Reducer or Dual-output Hardened-gear Speed Reducer
Stock Blender (Optional)
Linear Speed of Draw Roll		10~33.2(m/min)
Motor Power of Draw Roll		3(KW)
Motor Power of Swing Roll		1.5(KW)
Swing Frequency		2 (times/min)
Swing Range		1680(mm)
Overall Dimensions (mm)		7050×3670×2700
Weight		47600(kg)

Rubber/Plastic Mixing Mill